IEEE STANDARD 802.3AD – JunOS Configuration
The 802.3ad standard supports aggregation on full duplex, point to point links, to form a Link Aggregation Group (LAG), so…
SecureXL Process Details
SecureXL is a patented technology consisting of a software package with an API for the acceleration for multiple, intensive security…
WebUI port change doesn’t survive a firewall policy push or reboot
Change WebUI port to 4434 from Command line: webui disable webui enable 4434 Unfortunately after a cpstop/cpstart or reboot, the…
Route-based VPN between Juniper and Cisco
Another useful post for route-based vpn from http://x443.wordpress.com/page/5/ Cisco router configuration: crypto isakmp policy 1 encr aes 256 authentication pre-share…
Policy NAT-ing with overlap message – Order is important
Existing rule : static (dmz,outside) 200.147.90.89 172.17.1.3 netmask 255.255.255.255 There is a special situation come up today. When 172.17.1.3 access…
Checkpoint Domain Object
Was thinking to use Domain Object as a source in our firewall rule. After consulted with checkpoint support, it seems…
Add static route in Smoothwall
Add static route in Smoothwall Firstly, edit the file /etc/rc.d/rc.netaddress.up Above the 'echo "setting up firewall ……."', add: /sbin route add -net destination netmask subnetmask gw gateway devdeviceinterface ————————————–…
