Press "Enter" to skip to content

F5 Big-IP 2500 Appliance System Initial Configuration

0
Some Other related posts in this blog:

1. Use a DB9 null modem cable to connect to Console Port :

Setting Value
Bits per second [baud] 19200
Data bits 8
Parity None
Stop bit 1
Flow control None

note: Set baud rate first then power on your device. Else you may get messed text code in your terminal window as I got.

2. log in with following account:
root/default

Here is a video shows how to do F5 command configuration.


3. Change Management IP from default 192.168.1.x/24 to your management zone ip

root@(localhost)(cfg-sync Standalone)(NO LICENSE)(/)(tmos.sys)# delete /sys management-ip 192.168.1.245/24
root@(localhost)(cfg-sync Standalone)(NO LICENSE)(/)(tmos.sys)# create /sys management-ip 10.9.2.33/24

note: modify command doesnot work with this object

4. Access configuration web gui interface by https


5. Login with default username and password : admin/admin

6. Start to activate F5 appliance license

7. After activated license:

8. Setup Utility Complete
goto network -> configsync click finished to complete whole setup process.

Leave a Reply

%d bloggers like this: