1. Checkpoint configuration

a. Set up Checkpoint Gateway IPv4 address as the peer address showing in the cisco router.

b. Create a new Interoperable Device for Cisco Router

c. ISAKMP Settings and IPSec Settings

d. Pre-shared key

 e. Advanced ISAKMP Configurations and IPSec Configurations

f. Set up access-list

2. Cisco Router Configuration

crypto isakmp policy 10
 encr aes 256
 authentication pre-share
 group 2

crypto isakmp key cisco1234 address 192.168.2.37
!
crypto ipsec transform-set VPN1 esp-aes esp-sha-hmac
!
crypto map VPN-MAP 10 ipsec-isakmp
 set peer 192.168.2.37
 set transform-set VPN1
 match address ACL-VPN
!
interface GigabitEthernet0/0
 ip address 192.168.2.38 255.255.255.0
 crypto map VPN-MAP

ip route 10.9.200.0 255.255.255.0 192.168.2.37
!
ip access-list extended ACL-VPN
 permit ip 192.168.1.0 0.0.0.255 10.9.200.0 0.0.0.255
!

By Jon

One thought on “VPN Lab between Cisco Router and Checkpoint Firewall”

Leave a Reply to Motiur GoghostCancel reply