I am working on Symantec ATP , which new name is EDR. Here lists some of experience I learned from this set up. It is still updating.
YouTube Video:
Web GUI:
Some Command line troubleshooting commands:
Check Date:
localhost> show --date
Mon Jun 03 13:40:41 GMT 2019
localhost> show
usage: show [--help] [--date] [--version] [--info]
--help,-h More extensive help
--date,-d Show the current date and time
--version,-v Show the appliance version number
--info,-i Show system information
check Appliance Status:
localhost> status_check
This is the admin tool which verifies the following things.
1) Management Port Status
- This verifies if the management port is UP and Running.
This will show 'Active' if its UP and Running,
otherwise 'Inactive'.
2) Connection to Symantec
- This verifies if the appliance can reach www.s ymantec.com.
3) Scanner => Management Server Connectivity
- This verifies if the scanner is able to connec t to the
management server or not. On the management serv er,
displays the list of scanners associated with th e
management server. Use this tool on the scanner to test
connectivity between the scanner and the managem ent server.
4) Service Running
- This verifies the status of all services in Sy mantec EDR. If all
services are working properly, 'Success' is retu rned.
Otherwise, process names that are not working pr operly are
displayed.
5) Scanning Status
- This verifies if scanning on Symantec EDR is e nabled or not.
6) Interface Status
- This verifies whether interfaces in the curren t environment
are active, such as mgmt_port, wan1_tap1, and la n1_tap2 in
a virtual environment.
- This displays traffic received and transmitted by the
active interfaces.
7) Data Inspection Status
- This verifies if the packet inspection engine of Symantec EDR is
receiving traffic.
- This displays packet processed by the packet i nspection
engine of Symantec EDR.
8) Proxy Server Info
- This returns information about the proxy serve r, if one
exists in the management network. This informati on can be
used to test the connectivity to the Symantec se rvers in
the Cloud.
9) Connectivity to Servers
- This shows the connectivity to the Symantec se rvers in the
Cloud.
NTP: Synchronised.
Management Port Status: Active!
Connection to Symantec: Success!
Scanner => Management Server Connectivity: The AMQP broker is healthy.
Please use status_check on the s canners to
test connectvity to the manageme nt server.
List of connected Scanners is as below:
172.3.1.13
10.3.1.14
Service Running: Success!
Scanning Status: This is a management server . Sc anning status is not applicable for this.
Interface Status:
Interface mgmt_port is active!
Received Bytes= 15.4 MiB Transm itted Bytes=34.7 MiB
Interface wan1_tap1 is inactive!
Interface lan1_tap2 is inactive!
Interface wan2_tap3 is inactive!
Interface lan2_tap4 is inactive!
Data Inspection Status: This is a management server. Dat a inspection status is not applicable to this.
Is there a corporate proxy server in the management network? (yes:no)
no
Connectivity to Servers:
Accessed Cynic license server [https://licensing.dmas.symantec.com].
Accessed Cynic API server [https://api.us.dmas.symantec.com].
Accessed LiveUpdate server [http://liveupdate.symantec.com].
Accessed AV Detection ping server [https://stnd-avpg.crsi.symantec.com/postDet ectionEvent].
Accessed IPS Detection ping server [https://stnd-ipsg.crsi.symantec.com/postIn trusionEvent].
Accessed Aztec server [https://register.brightmail.com].
Accessed Software Update server [https://swupdate.brightmail.com].
Accessed Insight server [https://shasta-rrs.symantec.com/mrclean].
Accessed Mobile Insight server [https://shasta-mrs.symantec.com/partner].
Accessed Roaming and Email Security.Cloud Correlation server [https://datafeedapi.symanteccloud.com].
Accessed Telemetry: Statistics server [https://stats.norton.com/n/p].
Accessed Telemetry: File server [https://telemetry.symantec.com].
Accessed Breach Detection server [https://api-gateway.symantec.com].
Accessed Symantec EDR Cloud server [https://edrc.symantec.com].
Connectivity to Repository:
Accessed repository.
localhost>
Enable SSH Access:
localhost> sshconfig enable Enabling SSH server...Redirecting to /bin/systemctl start sshd.service done Enabling SSH server by default (will start at boot)...Note: Forwarding request to 'systemctl enable sshd.service'. done localhost>
Check Software Version:
The management server software version has to match scanner version. If not, scanner will not show in the management server’s web GUI.
localhost> show --version Version: 4.1.0-951 Install Date: Mon 25 Mar 2019 01:49:14 PM GMT localhost>
scanner:
localhost> show --version
Version: 3.1.0-678
Install Date: Mon 03 Jun 2019 01:31:47 PM GMT
localhost>
UpdateATP EDR version:
- update download
- update status
- update install
localhost> update
Usage: update download|install|list|clean_all|clean_metadata|clean_packages|clea r_update_state|rpmdb_repair|status
download: download latest available version to local cache
install: install latest available version from local cache
list: list all available versions
clean_all: clean up cached packages, metadata and other software up date data
clean_metadata: clean up cached metadata
clean_packages: clean up cached packages
clear_update_state: reset update state
rpmdb_repair: repair rpm database.
clear_lock: clear out old lockfile
status: print current update command status. run 'status_check' command to check repository access
Backup / Restore
From Command Line:
localhost> backup --user=testuser1 --password='password1234' --protocol=scp --port=22 --host=172.21.2.111 --path=/tmp/
2019-06-21 11:30:34,170 INFO Validating remote storage.
2019-06-21 11:30:34,170 INFO index value is None
2019-06-21 11:30:38,395 INFO EDR commands have been backed up successfully
2019-06-21 11:30:38,465 INFO Performing ES snapshot, could take a while...
2019-06-21 11:30:39,955 INFO Done with snapshot.
2019-06-21 11:30:39,955 INFO Snapshot succeeded.
2019-06-21 11:30:39,955 INFO Archiving backup.
2019-06-21 11:30:39,989 INFO Building config_export.txt
2019-06-21 11:30:44,830 INFO Sending backup archive to remote storage via scp.
2019-06-21 11:30:46,317 INFO Succeed running backup, backupfile=sedr_backup_4.1.0-951_20190621113039.tar.gz
localhost>
References:
- Basic troubleshooting steps for the ATP
- Best practices for Endpoint Protection on Windows servers
- Choosing which security features to install on the client
- About Application and Device Control policies in Endpoint Protection
- How Host Integrity works
- About Host Integrity requirements
- Setting up Host Integrity
- Creating and testing a Host Integrity policy
- Adding predefined requirements to a Host Integrity policy
