ASA1# sh ver

Cisco Adaptive Security Appliance Software Version 8.4(2)

Compiled on Wed 15-Jun-11 18:17 by builders
System image file is “Unknown, monitor mode tftp booted image”
Config file at boot was “startup-config”

ASA1 up 2 mins 54 secs

Hardware:   F1-GENERIC, 512 MB RAM, CPU Xeon 5500 series 2294 MHz
Internal ATA Compact Flash, 256MB
BIOS Flash unknown @ 0x0, 0KB

 0: Ext: GigabitEthernet0    : address is 000c.296a.2c4c, irq 0
 1: Ext: GigabitEthernet1    : address is 000c.296a.2c56, irq 0
 2: Ext: GigabitEthernet2    : address is 000c.296a.2c60, irq 0
 3: Ext: GigabitEthernet3    : address is 000c.296a.2c6a, irq 0
 4: Ext: GigabitEthernet4    : address is 000c.296a.2c74, irq 0
 5: Ext: GigabitEthernet5    : address is 000c.296a.2c7e, irq 0

Licensed features for this platform:
Maximum Physical Interfaces       : Unlimited      perpetual
Maximum VLANs                     : 100            perpetual
Inside Hosts                      : Unlimited      perpetual
Failover                          : Disabled       perpetual
VPN-DES                           : Disabled       perpetual
VPN-3DES-AES                      : Disabled       perpetual
Security Contexts                 : 0              perpetual
GTP/GPRS                          : Disabled       perpetual
AnyConnect Premium Peers          : 5000           perpetual
AnyConnect Essentials             : Disabled       perpetual
Other VPN Peers                   : 5000           perpetual
Total VPN Peers                   : 0              perpetual
Shared License                    : Disabled       perpetual
AnyConnect for Mobile             : Disabled       perpetual
AnyConnect for Cisco VPN Phone    : Disabled       perpetual
Advanced Endpoint Assessment      : Disabled       perpetual
UC Phone Proxy Sessions           : 2              perpetual
Total UC Proxy Sessions           : 2              perpetual
Botnet Traffic Filter             : Disabled       perpetual
Intercompany Media Engine         : Disabled       perpetual

This platform has an Unknown license.

Serial Number:
Running Permanent Activation Key: 0x00000000 0x00000000 0x00000000 0x00000000
Configuration register is 0x0
Configuration has not been modified since last system restart.

ASA1# sh run

: Saved
:
ASA Version 8.4(2)
!
hostname ASA1
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!

!--- Configure the outside interface.
!

interface GigabitEthernet0
 nameif outside
 security-level 0
 ip address 1.1.1.2 255.255.255.0
!

!--- Configure the inside interface.
!

interface GigabitEthernet1
 nameif inside
 security-level 100
 ip address 10.9.1.2 255.255.255.0
!
interface GigabitEthernet2
 shutdown
 no nameif
 no security-level
 no ip address
!
interface GigabitEthernet3
 shutdown
 no nameif
 no security-level
 no ip address
!
interface GigabitEthernet4
 shutdown
 no nameif
 no security-level
 no ip address
!
interface GigabitEthernet5
 shutdown
 no nameif
 no security-level
 no ip address
!
ftp mode passive

!--- This access list (inside_1_cryptomap) is used
!--- with the crypto map outside_map
!--- to determine which traffic should be encrypted and sent
!--- across the tunnel.

access-list inside_1_cryptomap extended permit ip host 10.9.1.1 host 10.19.1.1 

access-list 100 extended permit ip any any 

pager lines 24
mtu outside 1500
mtu inside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400

access-group 100 in interface outside
route outside 0.0.0.0 0.0.0.0 1.1.1.1 1

timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart

!--- PHASE 2 CONFIGURATION ---!
!--- The encryption types for Phase 2 are defined here.
!--- Define the transform set for Phase 2.

crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac 

!--- Define which traffic should be sent to the IPsec peer.

crypto map outside_map 1 match address inside_1_cryptomap

!--- Sets the IPsec peer

crypto map outside_map 1 set peer 1.1.1.1 

!--- Sets the IPsec transform set "ESP-AES-256-SHA"
!--- to be used with the crypto map entry "outside_map".

crypto map outside_map 1 set ikev1 transform-set ESP-DES-SHA

!--- Specifies the interface to be used with
!--- the settings defined in this configuration.

crypto map outside_map interface outside


!--- PHASE 1 CONFIGURATION ---!

!--- This configuration uses isakmp policy 10.
!--- The configuration commands here define the Phase
!--- 1 policy parameters that are used.

crypto ikev1 enable outside

crypto ikev1 policy 10
 authentication pre-share
 encryption des
 hash sha     
 group 1
 lifetime 86400
crypto ikev1 policy 65535
 authentication pre-share
 encryption 3des
 hash sha
 group 2
 lifetime 86400
telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept

!--- In order to create and manage the database of connection-specific
!--- records for ipsec-l2l—IPsec (LAN-to-LAN) tunnels, use the command
!--- tunnel-group in global configuration mode.
!--- For L2L connections the name of the tunnel group MUST be the IP
!--- address of the IPsec peer.

tunnel-group 1.1.1.1 type ipsec-l2l
tunnel-group 1.1.1.1 ipsec-attributes

!--- Enter the pre-shared-key in order to configure the
!--- authentication method.

 ikev1 pre-shared-key *****
!
!
prompt hostname context
no call-home reporting anonymous
call-home
 profile CiscoTAC-1
  no active
  destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
  destination address email [email protected]
  destination transport-method http
  subscribe-to-alert-group diagnostic
  subscribe-to-alert-group environment
  subscribe-to-alert-group inventory periodic monthly
  subscribe-to-alert-group configuration periodic monthly
  subscribe-to-alert-group telemetry periodic daily
crashinfo save disable
Cryptochecksum:811954ab13c5c9ec501d119d7421f3c1
: end

ASA2# sh run

: Saved
:
ASA Version 8.4(2)
!
hostname ASA2
enable password 8Ry2YjIyt7RRXU24 encrypted
passwd 2KFQnbNIdI.2KYOU encrypted
names
!
interface GigabitEthernet0
 nameif outside
 security-level 0
 ip address 1.1.1.1 255.255.255.0
!
interface GigabitEthernet1
 nameif inside
 security-level 100
 ip address 10.19.1.2 255.255.255.0
!
interface GigabitEthernet2
 shutdown
 no nameif
 no security-level
 no ip address
!
interface GigabitEthernet3
 shutdown
 no nameif
 no security-level
 no ip address
!
interface GigabitEthernet4
 shutdown
 no nameif
 no security-level
 no ip address
!
ftp mode passive
access-list inside_1_cryptomap extended permit ip host 10.19.1.1 host 10.9.1.1 
access-list 100 extended permit ip any any 
pager lines 24
mtu outside 1500
mtu inside 1500
icmp unreachable rate-limit 1 burst-size 1
no asdm history enable
arp timeout 14400
access-group 100 in interface outside
route outside 0.0.0.0 0.0.0.0 1.1.1.2 1
timeout xlate 3:00:00
timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 icmp 0:00:02
timeout sunrpc 0:10:00 h323 0:05:00 h225 1:00:00 mgcp 0:05:00 mgcp-pat 0:05:00
timeout sip 0:30:00 sip_media 0:02:00 sip-invite 0:03:00 sip-disconnect 0:02:00
timeout sip-provisional-media 0:02:00 uauth 0:05:00 absolute
timeout tcp-proxy-reassembly 0:01:00
timeout floating-conn 0:00:00
dynamic-access-policy-record DfltAccessPolicy
user-identity default-domain LOCAL
no snmp-server location
no snmp-server contact
snmp-server enable traps snmp authentication linkup linkdown coldstart warmstart

crypto ipsec ikev1 transform-set ESP-DES-SHA esp-des esp-sha-hmac 

crypto map outside_map 1 match address inside_1_cryptomap

crypto map outside_map 1 set peer 1.1.1.2
crypto map outside_map 1 set ikev1 transform-set ESP-DES-SHA

crypto map outside_map interface outside
crypto ikev1 enable outside
crypto ikev1 policy 10
 authentication pre-share
 encryption des
 hash sha
 group 1
 lifetime 86400
crypto ikev1 policy 65535
 authentication pre-share
 encryption 3des
 hash sha     
 group 2
 lifetime 86400

telnet timeout 5
ssh timeout 5
console timeout 0
threat-detection basic-threat
threat-detection statistics access-list
no threat-detection statistics tcp-intercept

tunnel-group 1.1.1.2 type ipsec-l2l
tunnel-group 1.1.1.2 ipsec-attributes
 ikev1 pre-shared-key *****
!
class-map inspection_default
 match default-inspection-traffic
!
!
policy-map type inspect dns preset_dns_map
 parameters
  message-length maximum client auto
  message-length maximum 512
policy-map global_policy
 class inspection_default
  inspect dns preset_dns_map
  inspect ftp
  inspect h323 h225
  inspect h323 ras
  inspect ip-options
  inspect netbios
  inspect rsh
  inspect rtsp
  inspect skinny
  inspect esmtp
  inspect sqlnet
  inspect sunrpc
  inspect tftp
  inspect sip
  inspect xdmcp
!
service-policy global_policy global
prompt hostname context
no call-home reporting anonymous
call-home
 profile CiscoTAC-1
  no active
  destination address http https://tools.cisco.com/its/service/oddce/services/DDCEService
  destination address email [email protected]
  destination transport-method http
  subscribe-to-alert-group diagnostic
  subscribe-to-alert-group environment
  subscribe-to-alert-group inventory periodic monthly
  subscribe-to-alert-group configuration periodic monthly
  subscribe-to-alert-group telemetry periodic daily
crashinfo save disable
Cryptochecksum:5d513ce8a20ceaefd6b9916dfd717905
: end
ASA2#

By Jon

Leave a Reply