My Cisco IOU Racks:
– from flyxj
Vmware configuration:
I have modified Interface IP to match my local configuration:
This is topology looks like. Totally there are six routers and four switches. Good enough to finish most routing / switching lab.
root@flyxj:~/LAB# ifconfig
eth0 Link encap:Ethernet HWaddr 00:0c:29:df:93:07
inet addr:192.168.80.159 Bcast:192.168.80.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fedf:9307/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:52 errors:0 dropped:0 overruns:0 frame:0
TX packets:13 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:5397 (5.2 KiB) TX bytes:908 (908.0 B)
Interrupt:19 Base address:0x2000
eth1 Link encap:Ethernet HWaddr 00:0c:29:df:93:11
inet addr:10.10.10.160 Bcast:10.10.10.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fedf:9311/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:141 errors:0 dropped:0 overruns:0 frame:0
TX packets:95 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:13924 (13.5 KiB) TX bytes:12882 (12.5 KiB)
Interrupt:16 Base address:0x2080
eth2 Link encap:Ethernet HWaddr 00:0c:29:df:93:1b
inet addr:192.168.20.160 Bcast:192.168.20.255 Mask:255.255.255.0
inet6 addr: fe80::20c:29ff:fedf:931b/64 Scope:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Metric:1
RX packets:44 errors:0 dropped:0 overruns:0 frame:0
TX packets:6 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:1000
RX bytes:4843 (4.7 KiB) TX bytes:468 (468.0 B)
Interrupt:17 Base address:0x2400
lo Link encap:Local Loopback
inet addr:127.0.0.1 Mask:255.0.0.0
inet6 addr: ::1/128 Scope:Host
UP LOOPBACK RUNNING MTU:16436 Metric:1
RX packets:16 errors:0 dropped:0 overruns:0 frame:0
TX packets:16 errors:0 dropped:0 overruns:0 carrier:0
collisions:0 txqueuelen:0
RX bytes:2014 (1.9 KiB) TX bytes:2014 (1.9 KiB)
Using Telnet access 10 devices with port from 2001 to 2010. Also IOU3 itself support ssh access.
